Renewable Energy Alternatives

Permanent URI for this collection

https://repository.nrf.go.ke/handle/123456789/11

Browse

Browsing Renewable Energy Alternatives by Funder "African Development Bank"

Now showing 1 - 3 of 3
  • Publication
    Publication
    Characteristics of TiO2 Compact Layer prepared for DSSC application
    (Path of Science, 2018-11-04) Musila, Nicholas; Munji, Mathew; Simiyu, Justus; Masika, Eric; Nyenge, Raphael; Kineene, Miriam; Musila, Nicholas; Munji, Mathew; Simiyu, Justus; Masika, Eric; Nyenge, Raphael; Kineene, Miriam
    Dye-sensitized solar cells (DSSCs) offer an economically reliable and suitable alternative in moderating the challenges presented by the existing convectional photovoltaic cells. However, the efficiency of dye-sensitized solar cells has remained relatively low. For this reason, this research was aimed at studying the characteristics of TiO2 compact layer that can be applied in DSSCs as a way of improving efficiency. To achieve this, TiO2 compact layer was deposited on a conductive glass substrate by using Holmarc’s Spray Pyrolysis system, using Ultrasonic Spray Head and spraying in the vertical geometry. X-ray Diffraction studies revealed that TiO2 compact layer was of anatase phase and had tetragonal crystalline structure. Raman spectroscopy showed that the most intense peak appeared at 142 cm-1 due to the external vibration of the anatase structure. Hall Effect studies revealed that TiO2 compact layer has a high density of charge carriers’ value of 1.25 × 1019 cm-3 hence it can be used in DSSC applications.
  • Publication
    Publication
    Effect of TiO2 Compact Layer on DSSC Performance
    (Social Science Research Network, 2018-09-30) Musila, Nicholas; Munji, Mathew; Simiyu, Justus; Masika, Eric; Nyenge, Raphael
    Dye-sensitized solar cells offer an economically reliable and suitable alternative in moderating the challenges presented by the existing convectional photovoltaic cells. Whereas, for convectional solar cells the semiconductor adopts both the duty of light absorption and charge carrier transport, these two functions are separated in dye-sensitized solar cells. However, the efficiency of dye-sensitized solar cells has remained relatively low. For this reason, this research was aimed at how to increase the dye-sensitized solar cells performance. To achieve this, compact cover of TiO2 was deposited on a conductive glass substrate by using Holmarc’s Spray Pyrolysis system, using Ultrasonic Spray Head and spraying in vertical geometry, while TiO2 nanoparticles and nanotubes were deposited by screen printing technique on top of a transparent conducting FTO glass slide with or without the TiO2 compact layer. Transmission characteristics showed that introducing TiO2 compact layer on the conductive film lowers the transmission while reflectance properties were less than 15 % for all the prepared thin films. SEM micrographs showed that TiO2 nanotubes had a skein-like morphology with abundant number of nanotubes intertwined together to form a large surface area film. Solar cell performance properties revealed that introducing compact layer to dye-sensitized solar cells improved the performance by 145 % (from 1.31 % to 3.21 %) while TiCl4 treatment on compact layered dye-sensitized solar cells increased the efficiency by 28.79 % (from 0.66 % to 0.85 %).
  • Publication
    Publication
    Optical Properties and Analysis of OJL Model’s Electronic inter-band Transition Parameters of TiO2 Films
    (Path of Science, 2018-07-31) Musila, Nicholas; Munji, Mathew; Simiyu, Justus; Masika, Eric; Nyenge, Raphael; Musila, Nicholas; Munji, Mathew; Simiyu, Justus; Masika, Eric; Nyenge, Raphael
    Titanium dioxide is a wide band gap semiconductor responsible for the bright white appearance in most substances. This material has many unique properties due to its extra-ordinary chemical stability. TiO2 has a conduction band that closely matches the excited energy level of organic dyes hence it is used in fabrication of photo-anode electrode of dye sensitized solar cell. However, the optical properties and the density of states of TiO2 thin films determine the performance of dye sensitized solar cell fabricated from TiO2 photo-anode electrode. For this reason, the purpose of this study was to investigate the optical properties and the OJL electronic inter-band transition analysis of TiO2 nanoparticle thin films. Under the OJL model, the expressions of density of states were specified for the optical transition from the valence band to the conduction band. The TiO2 nanoparticles were prepared using sol-gel and hydrothermal methods and deposited on a conductive glass substrate by screen printing and spray pyrolysis techniques. SEM analysis revealed that TiO2 nanoparticles were spongy and had unevenly sphere-shaped profile while TiO2 nanotubes had a skein-like morphology with abundant number of nanotubes intertwined together. This study showed that TiO2 thin films have both direct and indirect band-gaps. The OJL Gap energy (E0) values were observed to be between 30273.2356 and 31072.0000 wavenumbers which translated to band-gap energies between 3.744 and 3.843 eV. From these findings showed that TiO2 films prepared could be used in the fabrication of high performing dye-sensitized solar cell.